In the corner of the gym, the dynamic cycle is always the most popular, in the process of people using, will leave a lot of sweat, if not timely maintenance, daily use and the user left the sweat will have a certain impact on the equipment, we have to learn how to maintain.
After daily use, wipe the frame and handlebar with a slightly damp soft cloth, paying special attention to the place where sweat stains accumulate. Neutral cleaners are recommended to avoid corrosion of the surface coating. Contact areas such as the saddle and handlebars should be cleaned once a week using a professional disinfectant. Check chain/belt tension, standard value is 10-15mm deflection. Use a chain measuring tape to check wear and tear, over 0.75% needs to be replaced immediately. Apply special lubricant regularly, maintenance is recommended every 50 hours. Use torque spanner to check the key part bolts
Use professional tester to detect the resistance precision, the error is controlled within ±5%, make sure the thickness of brake pads ≥2mm, brake response time <0.5 seconds, use high temperature grease to maintain the middle shaft and flywheel bearings. Every quarter, replace wearing parts, including pedal cushions, brake pads, belts, etc.; calibrate the sensors, use standard weights to calibrate the power meter to ensure that the accuracy is within ±2%; check the frame, and use ultrasonic flaw detectors to test the key welding points. Annually, we replace a full set of bearings, check frame levelling, adjust floor bolts, update control system firmware, and carry out a full vehicle stress test.
Systematic maintenance not only extends the life of your equipment, but also ensures a safe and comfortable ride every time. Remember, a well-maintained spin bike is not only a fitness equipment, but also your faithful partner on the road to health. Let's take care of it and make it last longer. If you want to buy a spin bike, check out our commercial spin bike for gym, commercial indoor bike, gym quality spin bike and more.